Режим модерирования
Документы
НОВОСТИ
OPTICAL BROTHERS
ФАЙЛЫ
АРХИВ САЙТОВ
ССЫЛКИ
О САЙТЕ
ФОРУМЫ
ГОСТЕВАЯ КНИГА
Беларуская моваРусский языкEnglish language

Copyright © 2001-2006 Optical Brothers
qc_2_62full.zip · QC262full.scl/Q262hlpE.tЗакрыть ×
       ______    ∙      °         ___∙    ____   ∙   _____ ____
 °    /  __  \   ∙    ___   ∙    /  / ∙∙ /___ \  °  / ___//___ \
   ∙ /  / /  / ______/__/ _____ /  /__    __/ /    / /_    __/ /
    /  /∙/  / /  /  /  / /  __//   __/∙ / ___/    / __ \ / ___/
   /  /_/  /_/  /  /  /_/  /__/    \   / /___ __∙/ /_/ // /___∙
∙  \________/\____/\___/\____/__/__/  /_____//_//_____//_____/∙
  ∙  _______     ∙        ∙           ∙∙            ___
 ∙  /  ____/   Spectre/Optical Brothers present:   /  /  ∙  °  ∙
°  /  /  ∙ _____________ °_______  __________ ∙___/  /__________
  /  / ∙  /     /       \/       \/     /    \/     /  ___/  __/
 /  /____/  /  /  /  /  /  /  /  /  /  /  /  /  /  /  ___/  / ∙
 \______/_____/__/__/__/__/__/__/\____/__/__/\____/________/ ∙
___________________________________________________________

 ┌──────-─-─-─-─-----
 │ Quick Commander
 ├─────────────────────-─-─-─-─-----
 │ Based on boot by Max Petrov, 1996
 ├─────────────────────────────────-─-─-─-─-─------
 │ User's manual (english edition by Mac Buster)
 └─────────────────────────────────────────────-─-─-─-─-─------

   For those who sees Quick Commander for  the  very-very  first
time: Quick (it is really quick) works with your floppy disks at
the maximal possible speed and utilises direct access to WD-1793
chip to achieve it. Alas, this means that you can not use  Quick
with a hard drive.
   In case you've got 16K or 32K of Shadow RAM (a.k.a Cache) you
may load Quick into it and invoke the commander at any moment  -
all you have to do is to press the Magic  button  on  your  disk
interface. To load Quick Commander into  Shadow RAM you  have to
press and hold on <I> (first letter for <Install>) button  while
the commander is loading. If you see a short green flash on  the
border then Quick was successfully loaded and installed into the
Shadow RAM, after the flash you may release  the <I> button. Now
you may invoke Quick by a single Magic button hit.

                 ╔═════────────────────────┐
                 ║       Main  menu :      ║
                 └────────────────────═════╝

   When commander is loaded you will see the main  menu  on  the
screen. Here is schematical illustration of it:

┌──────────────────────────────────────────┐
│A boot                     ╔═╗╔═╗╔═╗╔═╗╔═╗│ - dives list
│A FUT2.01                  ╚═╝╚═╝╚═╝╚═╝╚═╝│
│B EMS 2.55                 ╔═╗╔═╗╔═╗╔═╗╔═╗│ - drives list
│C ZXZIPs+!                 ╚═╝╚═╝╚═╝╚═╝╚═╝│
│D ZXUNZIP!                 ╔═════════════╗│
│E  Click!                  ║ disk title  ║│ - disk title
│F Lara 4.5                 ╠═════════════╣│
│G Quick262                 ║  Memr:.512K ║│ - available RAM
│                           ║   Del:..0   ║│ - deleted files.
│                           ║  Free:1411  ║│ - free sectors.
│                           ╠═════════════╣│
│                           ║   Mrk:..0   ║│ - \
│                           ║  Sect:...0  ║│ -  are not used
│                           ╠═════════════╣│    in the menu
│                           ║  Slow save  ║│ - /
│                           ╠═════════════╣│
│                           ║ ╓Spectre──╥ ║│ - authors logo
│                           ║ ╙─────2001╨ ║│
│                           ╠═════════════╣│
│                           ║             ║│ - not used in
│                           ║             ║│   the menu
│                           ╚═════════════╝│
│         ─═Quick Commander v2.62═─        │
│ 5-reread Name Care Run_48 Tr-dos spc-mark│ - hotkeys list
└──────────────────────────────────────────┘

   On the left hand side of the screen you  will  see  names  of
BASIC files, one filename will be marked by cursor bar. Use <Q>,
<A>,<O>,<P> and <6>,<7>,<8>,<9> buttons to move the cursor  bar.
Press <0> or <ENTER> to start file under  the  cursor  bar. Also
you may start a file by pressing  a button with letter which  is
written on the left hand side from the filename along with <Caps
Shift> (some files can  be  started  without  <Caps Shift>). For
example: to start file "ZXUNZIP!" file from the illustration you
have to press <Caps Shift>+<D>. Quick Commander  will  load  and
start file using its own routines,  this  allows you start files
with absolutely equal names from the _same_ disk. At the  bottom
part of the screen you may see  hot-keys list  of the commander,
e.g. to start a file in 48K-only mode  you must press button <R>
(the capital letter in "Run_48" writting). Other  hot-keys  used
in the main menu for following functions:

   1,2,3,4  -  Select A,B,C or D  drive  respectively,  selected
drive icon will be "recessed" and change its colour to green  at
the right upper corner of the screen.
   Edit mode (<CS>+<1>) - cycle switch of drive. Press and  hold
on the button till desired drive is selected.
   Caps Lock (<CS>+<2>) - cycle switch of destination drive. Not
used in this menu.
   "5" (5-reread) - reread disk directory.
   "N" (Name) - disk rename mode. You may enter up to 11 symbols
for the disk name. Use: <Left arrow> and <Right arrow>  to  move
the cursor mark, <Delete> - delete a symbol under  cursor  mark,
<Edit> to switch cyrillic/latin  alphabet. <Caps> - switch small
and capital letters of  current alphabet. Cyrillic alphabet uses
standard "ЯВЕРТЫ" keymap, letters "ч","э","ш","щ","ю" are mapped
to "a","s","f","g","x" with <Symbol Shift> pressed. <Extend> and
right mouse button used  to leave disk rename  mode, <Enter> and
left mouse button - to save new name to the disk directory.
   "C" (Care) - disk service menu. See detailed  description  of
the menu above.
   "R" (Run_48) - start file in 48K-only mode. It sets  5th  bit
of #7FFD port and starts file whose name is undercursor bar.
   "T" (Tr-dos) - quick exit to TR-DOS.
   "Space" - file service menu.

   Move mouse to see second cursor (mouse pointer). Use mouse to
start files - click left mouse button on a file name. Use  right
mouse button to mark files to start the file  in  48K-Only mode.
Click on  disk drive name  to  change  current  drive. Click  on
"hot-keys" at the bottom of the screen  to see options. If  your
mouse has a third (middle) button you may use it to  reread disk
directory. If your mouse  has  no  middle button you may  reread
disk directory by selecting "5-reread" option  in the "hot-keys"
list at the bottom  of  the screen or press one of two "buttons"
at  the top right corner of the screen. These "buttons" shown at
the illustration above.


                 ╔═════────────────────────┐
                 ║   File service menu :   ║
                 └────────────────────═════╝

┌──────────────────────────────────────────┐
│boot     B .39             ╔═╗╔═╗╔═╗╔═╗╔═╗│ - Source drive
│EMS 2.55 B .97             ╚═╝╚═╝╚═╝╚═╝╚═╝│
│EMSphone p ..2             ╔═╗╔═╗╔═╗╔═╗╔═╗│ - Destination drive
│EMSmacro m .14             ╚═╝╚═╝╚═╝╚═╝╚═╝│
│CoolRead O ..2             ╔═════════════╗│
│ZXZIPs+! B .66             ║  disk name  ║│ - disk name
│ZXUNZIP! B .53             ╠═════════════╣│
│EMSsetup s ..1             ║  Memr:.512K ║│ - available RAM
│ZX-WORD  O .51             ║   Del:..0   ║│ - deleted files
│BbsPrep  O .18             ║  Free:1411  ║│ - free sectors
│userlist S ..2             ╠═════════════╣│
│Driv4.02 C .13             ║   Mrk:..0   ║│ - marked files
│ Click!  B 175             ║  Sect:...0  ║│ - marked sectors
│ Click!  C 175             ╠═════════════╣│
│Lara 4.5 B .93             ║  Slow save  ║│ - Saving mode
│Lara 4.5 W .43             ╠═════════════╣│
│setup    p ..6             ║ 20553/16500 ║│ - current file info
│music    M .12             ║ ZIP/..9/..6 ║│
│Quick262 B .57             ╠═════════════╣│
│View4.1! Z .60             ║             ║│ - a "window" for an
│                           ║             ║│   analyser for Copy,
│                           ╚═════════════╝│   Move, Play, etc.
│         ─═Quick Commander v2.62═─        │
│Copy Move Del Ren merGe View muZ m+ m- spc│ - "hot-keys" list
└──────────────────────────────────────────┘

   "Slow save"  or  "Fast save"  messages reflect current saving
mode of the commander. "Slow save" mode will  work  fine on  any
drive type. But if you want to increase saving speed in 2 (two!)
times you may change the mode using any disk-doctor (hex-editor)
like Conver vX.XX or Real Commander v1.XX, open  first sector of
Quick Commander's BASIC file (Quick262.B) and replace letter "N"
to letter "Y" in line "save: fast = N" and save changes  back to
the disk. And after that at every start the commander will  show
you "Fast save" message and will work in  the "Fast save"  mode.
Pay  an  attention: in  "Fast save"  mode  you may have unstable
writting process on some types of disk drives. After changing to
"Fast save" mode youhave to copy several files to clean disk and
check it with "check" option from disk service menu. Do  not use
"Fast save" mode if  you have an error message at each 2nd track
while  checking  the  disk  by  "check"  option.  Btw - you  may
increase speed if you disable  "Restore disk"  option  in  "Disk
care" menu.
   Under window for "Fast save" and "Slow save" you may see some
numbers - this is information on the file under  cursor  bar. On
the illustration above there are following information shown:

20553 - start address
16500 - file size in bytes

ZIP - file extension
..9 - number of first track of the file
..6 - number of sector

   Move cursor using <Q>, <A>, <O>, <P>; <6>, <7>, <8>, <9>; and
cursor keys (arrows). Use <0>, <ENTER> and left mouse  button to
mark filename.
   <1>,<2>,<3>,<4> - Select A,B,C and D disk drive respectively,
selected drive  displayed as recessed drive icon of greed colour
in right top corner of the screen.
   Edit mode (<CS>+<1>) - cycle switch of  drive  A,B,C,D. Press
and hold on the button till desired drive is selected.
   Caps Lock (<CS>+<2>) - select destination drive.
   "5" - reread disk directory.
   "C" (Copy) - copy marked files. All files  will  be copied in
the same sequence as they were marked.

NOTE: If you have not enough free spase  on destination disk and
you have a "No space" message on the screen, you may  leave this
mode only if you press and  hold one  right  mouse  button  till
"Break, Retry, Ignore, Abort" menu appear on the screen. In this
way you may stop ANY disk operation using mouse. On the keyboard
you may press <SPACE> key to have the same effect, or button <A>
for immediate interrupt.

   "M" (Move) - move  (pack)  free disk space. Will work only if
you have deleted files on current disk.

   Copy and Move functions will not work  in 48K mode. Commander
uses all available memory  of  your computer. Detected RAM shown
in the right  upper corner of the screen (on the illustration it
is displayed as "Memr:.256K"). The commander can detect and  use
following  memory  extensions: Scorpion256/Kay256 on #1FFD port,
Profi256-1024 on #DFFD port  and Pentagon 256/512 on #7FFD port.
In  Scorpion256  mode 8ht page (with shadow monitor) will not be
used. You  may  see  progress  indicator (squares) in  the right
bottom corner of the screen.

   "D" (Delete) - delete marked files.
   "R" (Rename) - rename  file  under  cursor. Works in the same
way as "Disk rename" in main menu. If you enter a symbol instead
of "grid" in name of deleted file then the file will be restored
(undelete).
   "G" (merGe) - "join" marked files. There should  not  be  not
marked of deleted files between files you want to join. If  more
than 255 sectors marked then several files will be generated.
   "V" (View) - if cursor stays on @-file or  on  screen$  (6912
bytes lenght) commander will turn into viewer mode. Use  <SPACE>
and leftmouse button  to change  picture colours, <ENTER> - next
file, rest  buttons - exit. On any other file than @ and screen$
commander will turn into a text-viewer.
   "Z" (muZ) - search  in  marked  file  for  a  music module in
Pro-Tracker v3.x format in a marked file. Module may be compiled
or not, with or without player.
   "+" (m+) - select all files (invert selection).
   "-" (m-) - unmark all marked files.
   <SPACE> - exit to main menu.

   After double click on a file name the commander will check is
the file is screen$ or is there are a music module inside. If no
screen$ of music module isn't found, commander will turn to text
viewer mode.

                 ╔═════────────────────────┐
                 ║  Disk  service  menu:   ║
                 └────────────────────═════╝

   Press <C> in initial menu to get into this mode.

   "K" (Keep cat) - backup disk directory to 161 track (not used
by system).
   "S" (Show) - compare disk directory with backup copy.
   "E" (rEstore cat) - put  backup  directory  from 161 track to
0 track.
   "C" (Check disk) - fast disk check. If commander finds a disk
error it will automatically try to restore it. Process indicated
by usual "squares" at a corner ofthe screen.
   "R" (Restore disk)  -  restore  disk. May  also  be  used  to
increase a data transfer speed.
   "Check disk" and "Restore disk" may also be  started  from  a
certain marked file.
   "F" (Format disk) - format disk. You  have  to enter name for
the disk (up to 11 symbols). If  you do not  want to  enter  new
name (press <ENTEND MODE> or right  mouse button, and so on) you
will not  be  allowed  to  format disk and will be rejected from
disk format mode. Formatting process will be started right after
you have entered last symbol of the disk name. The  process will
be indicated by "squares" in a corner  of  the screen. REMEMBER:
Quick  Commander  starts  formatting  from the LAST track of the
disk, so you have a  time  to  stop process  if you occasionally
tried to format wrong disk. In best case you will not loose data
in  worst  case =:-O... Disk  will be formatted for 2544 sectors
(80 tracks, 2 sides).

                 ╔═════────────────────────┐
                 ║    File viewer mode:    ║
                 └────────────────────═════╝

   Starting from version 2.2 and above,  Quick Commander  has an
internal viewer for text files. It uses 64 chars per line (turbo
idea by KSA). The  viewer  displays files with up to 255 sectors
length. If file has 0 sectors length then 255  sectors  will  be
loaded into viewer's buffer.
   Viewer control:

Line up:                     <9>, <Q>, cursor up
Line down:                   <8>, <A>, cursor down
Page up:                     <True video>, cursor left
Page down:                   <Inverse video>, cursor right

Move right (up to 2040 symbols):      <7>, <P>
Move left (up to 2040 symbols):       <6>, <O>
To begin of the file:                 <B>
To end of the file:                   <E>
Next file:                            <ENTER>
Enable/Disable sound thru AY:         <S>
Enable/Disable line wrap mode:        <W>
Convert text:                         <C>
Return to commander mode:             <Edit mode>, <Extend mode>

   Mouse control in the viewer is equal to mouse control in file
mode of the commander. At the bottom part of  the screen you may
see another "hot keys" list.
   Screen with text virtually split onto four parts:

┌───┬───────────────┬───┐
│   │               │   │
│   │       3       │   │
│ 1 ├───────────────┤ 2 │
│   │       4       │   │
│   │               │   │
└───┴───────────────┴───┘

   Click on 1-st area to move text one page up. Click 2-nd  area
to move text one page down. Click 3-rd area  to  move  text  one
line up. Click 4-th area to move text one line down.
   Text converter (hot-key <C>) used to convert text from one to
another text encoding standard, you may see: windows (Win-1251),
KOI8-R, DOS (CPP-866) standards.
   Line  wrap  mode  (hot-key <W>)  can  be  enabled/disabled by
option "wrap". The  mode  is  useful  for  texts with long lines
(over 64 chars). When the mode is on options "Left" and  "Right"
will not work and also tabs are ignored.
________________________________________________________________

   Thats it. Sends your offers, ideas, moneys, alive credit card
PINs, keys-from-an-appartments-full-of-money (with  addresses of
course), parsels, letters, and so on to my e-mail:

E-mail: spectre_ob@euro.ru

On official home site of Optical Brothers group you always can
find recent version of Quick Commander, also you can leave some
lines in phorum, and have some chat with author of the Quick:

http://www.opticalbrothers.f2s.com

  Bye!
                                        Spectre/Optical Brothers
 qc_2_62full.zip
Quick Commander v2.62 (rus+eng) by Spectre · подробнее
Все файлы
В архиве
file_id.diz 899
На диске QC262full.scl
file_id.d 899 Q262hlpE.t 16763 Q262hlpR.t 16691 Q262hstR.t 10976
Кодировка
определена сама
Перенос строк
по краю нет