в–‘ в–‘в–“в–„в–„в–„в–„в–„
в–„ в–“ в–“в–Ђ в–Ђв–Ђв–Ђв–“в–„в–„в–„в–„в–„ в–Ђв–“в–€в–„ в–Ђв–Ђв–Ђв–€в–€в–€в–€в–“в–„в–„в–„в–„ в–“
в–€в–€в–“в–€в–€в–„в–„в–„ в–“в–‘ в–‘ в–Ђв–Ђв–Ђв–Ђв–’в–Ђв–€в–“в–„ в–Ђв–Ђв–Ђв–Ђв–€в–€в–“в–€в–€в–„в–„в–„ в–“в–‘
в–‘в–Ђв–Ђв–Ђв–“в–€в–€в–€в–“в–„в–€в–’ в–‘ в–’ в–Ђв–‘ в–‘в–Ђв–Ђв–Ђв–“в–€в–€в–€в–“в–„в–€в–’
в–‘ в–Ђв–Ђв–€ в–‘ в–‘ в–‘ в–Ђв–Ђв–€ в–‘
Quick Commander v4.01
History of changes
[!] important [+] new [*] better or changed
[?] rather worse than better [-] a bug fixed
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
:: Version 4.01
:: Date: 19.11.2026
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
[*] Support of esxDOS 0.9.0: files and folders with long names
(LFN=1, as in its kit) - viewing, running, putting in a
drive and the tape, Copy, Erase, Rename, entering folders
and images work by the whole name (in 4.00 "Error.", and a
long name spoilt the memory). The panel shows the name's
first 7 characters and ~, the extension past the last dot;
a folder whose path is longer than 127 characters doesn't
open, a tape with such a path says "Too long." (esxDOS
refuses it). In Quick Setup images and folders with long
names are listed, put in drives and opened. With esxDOS
0.8.9 (and 0.9.0 with LFN=0) all works as before.
[*] Rename of a file with a long name: the new name is typed
whole (8.3); Enter with nothing edited changes nothing.
[?] On 48K files can't be marked: the memory went to the
fixes.
[-] SD card folders made on a Mac had no "..": macOS makes it
hidden. Now ".." is always shown, in QC and in Quick Setup.
[-] On 48K going from the tape to the SD card's panel opened two
panels and read drive B's catalogue over the overlays in the
memory.
[-] On a Pentagon 1024 reading the Gluk clock turned the 7 MHz
turbo on: QC cleared bit 4 of port #EFF7 (since 3.11).
[-] Reading and writing disks is stopped by Break (Caps
Shift+Space), not by Space alone: paging a text by Space in
the viewer no longer gives "Break." while the file's next
part is read from a floppy.
[-] Caps Shift+E in the card's panel shown alone (F) left the
drive's catalogue of the image just ejected in the hidden
panel, and F showed it. Now the hidden panel, as with two
panels, becomes the card's.
[-] In the ROM set, which has no card overlay, QC left on the
card under esxDOS opened the drive's panel after a reset,
but line 22 had the SD button chosen, not A.
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
:: Version 4.00
:: Date: 14.11.2026
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
[!] Two panels in place of one: on the left the input drive's
catalogue, on the right the output's, where files are copied
to. Both disks are in view at once, QC no longer moves to
the output drive after Copy, a file can be dragged with the
mouse to the other panel; Extend mode or a click makes the
other panel active, each panel with its own marks. The
screen was made anew for this: no frames, the panels split
by scroll bars, the active one white, and the drive buttons
with an arrow on line 22 show where a copy goes from and to.
On one drive there is one panel of 42 files, as before.
[!] The SD card under esxDOS has a panel of its own (S): the
card's folders, its files viewed and played, renamed, moved,
erased, new folders, marking by a mask. TRD, SCL, TAP and
TZX images open by Enter as folders, with nothing mounted in
a drive, and QC changes the card's TRDs and TAPs right in
their files. Games and programs run as from the NMI browser:
disks, tapes, snapshots. Before, QC saw the card only
through an image mounted in a drive.
[!] Copying between any media: a drive, an SD card's folder, a
TRD on the card, a TAP and the tape, any way round, into the
other panel. Names and types are converted on their own
(SONG.PT3 on the card is SONG of type p on a disk, and
back), long files are cut into parts and joined again
(below). QC has become the bridge between TR-DOS floppies
and the SD card.
[!] The tape, a fourth medium: a TAP of the card becomes
esxDOS's tape, and QC shows it as a disk: programs run by
Enter or their letter, files are viewed, copied to a disk or
the card and appended to the tape. The tape stays in for
SAVE too: what games, assemblers and editors run from QC
save goes into the same TAP. A TZX QC writes into a TAP
beside it.
[!] Copying long files. On TR-DOS disks a file past 255 sectors
is a group of parts, as Hrip and RAR write it: QC sees it as
one file, the whole group's length, marked, copied and
renamed whole. To the SD card a group is copied as one file,
and a long file from the card to a disk or a TRD is cut into
such parts (up to 718080 bytes); merging (Caps shift + G)
past 255 sectors makes a group too. So big files from a PC
get to a floppy and back.
[!] Viewing big files. The viewers take files longer than 64K,
the disks' groups and the card's files, as much as the
memory holds (on 128K 48K, on 1024K about 924K). A text and
a hex dump of any length scroll to their very end: QC reads
the pages from the disk, the card or the tape as you scroll,
End goes to the file's end (its start alone before). A ZX0
file that doesn't fit the memory is unpacked again right
from its medium (it was shown packed before).
[!] Packing big files. P and U pack and unpack ZX0 as a stream,
in portions from a disk or the card, files of any length (up
to 48K of data before): a group of parts is packed whole, a
long stream goes onto a disk as such a group, onto the card
as one file.
[!] The dot command .qc: under esxDOS QC starts right from
BASIC, as any esxDOS command (Quick Setup puts it in /BIN
with TRDBOOT.BIN). .qc NAME first puts an image of the
current folder in, a TRD or SCL in drive A, a TAP in the
tape, and opens QC on it.
[!] QC starts with nothing to install: the snapshot QC_4_00.sna
(in emulators, and under esxDOS by .snapload or the NMI
browser) and the tape QC_4_00.tap (LOAD "") bring QC with
all of its overlays, with any disk in A. Under esxDOS with
no disk in the drive QC opens on the SD card's panel in
place of "No Disk.".
[+] P and U work on the SD card too: they pack and unpack the
card's files, its images' files and the disks' files into a
folder, onto a disk or into a TRD of the other panel.
[+] Tape files (TAP, TZX) and SCLs kept on a TR-DOS disk open by
Enter as an image on the card does, big ones too (a group of
parts): their files can be viewed and copied. So an SCL
keeps files on a disk as a folder does (QC can't put files
into an SCL yet).
[+] Rare keys are in view: while Caps shift or Symbol shift
alone is held, line 23 shows the mode's row of keys for it,
and they can be clicked; the right mouse button on line 23
goes through these rows. No need to know them by heart.
[+] QC remembers the SD card's and the tape's panels as it does
drives: after a program (through the resident) and after a
reset (with Gluk's or SMUC's CMOS) it opens there again. In
Quick Setup you choose the medium QC starts on from a disk
and what the other panel shows (Start, Output).
[+] TRD images of 1 MB (256 tracks), as esxDOS mounts them: in a
drive and on the card's panel they are read and written
whole.
[+] Break works as Edit mode: it cancels typing, answers "no" to
a question, gives up after an error.
[+] While copying and compacting (M), line 23 shows the file
being read and the one being written.
[*] Quick Setup is a wizard of steps: the menu's item, the
drive, the settings, the result on a screen of its own
("Done." or "Not done." and why); its menu by letters. It
takes QC from the kit's disk instead of carrying it: QS's
file is 66 sectors in place of 174.
[*] The digits as the Cursor joystick's: 5..8 the arrows, as on
the keys, 9 marks, 0 is Enter (the Sinclair joystick's
before). S is the SD card, T the tape, the way out to TR-DOS
from the main menu X, merging files Caps shift + G (G
before), erasing E alone (D too before).
[*] Enter on BASIC in the file menu asks "Run name.B?", as on
code (it ran it at once before); BASIC runs with no question
from the main menu alone.
[*] In the main menu Caps shift + a letter runs the program
beside it; small letters no longer run anything (they did
before, but QC's own keys).
[*] On a disk with no basic files the main menu says
"(no BASIC programs)" and stays (Space: all the files); QC
went to the file menu by itself at the start and when a
drive was chosen, and showed an empty main menu otherwise.
[*] The viewers: a Hrust file whose data don't fit (on 128K past
42K) gives "Too long."; a UTF-8 text is shown with no
conversion in memory, its first screen at once; the dump's
addresses from 0, of 6 digits.
[*] Clearer questions and errors: questions end with
"Yes No", both can be clicked; No Space, Cat Over, No
Disk and Bad disk while copying show "Retry Abort" (before,
any key retried, with no hint).
[*] Typing a name: Russian letters in the ЙЦУКЕН layout, as on a
PC, switched by Extend mode (ЯВЕРТЫ before).
[*] On the right of a file: its number and the files' count
(File: 37/128) in place of its track and sector, a BASIC
program's length with its variables; I switches kilobytes in
the file list too.
[*] P: Break stops it too, it writes 2K at a time (a sector
before), its progress squares in two rows as Copy's, the
packing ratio seen at once; it packs in 3 memory pages in
place of 4, a little faster.
[*] With two panels P and U write the new file to the other
panel's disk (to the same one before).
[*] 1..4 on a drive with no disk: "No Disk.", and nothing
changes, the panels, the cursor and the marks stay (the
marks and the cursor were reset before).
[*] Enter in View and muZ skips files with no sectors (it went
back to the commander before); View takes a BASIC program
with its variables.
[?] The file commands lie in the overlays (.qco) too, and
without the overlays' file QC doesn't start: it tells where
to get it and goes to TR-DOS (under esxDOS to esxDOS).
[?] On 48K the main menu alone (under esxDOS also the SD card's
panel and the tape's main menu: moving about, running,
mounting images); the rest says "Not available on 48K."
(before, QC read the overlays from the disk one by one).
[?] On 48K and 128K QC no longer stays in memory as a resident:
a program run from QC can't go back to it.
[?] The ROM set (QC_4_00_ovr.rom) and the 32K Shadow RAM hold
not all the overlays: the file commands, the text viewer
with the dump, the help and unpacking (all but packing
before).
[?] Save boot is gone: Quick Setup writes the boot with its
settings (item B).
[?] The help (H, ?) is shorter: the keys in two columns, no
descriptions (the details are in the guide); the keys not
available now are grey, the last line says why.
[?] 21 files a column in place of 22: in the boot mode programs
run by the letters A..U, not A..V.
[-] M with the full catalogue (F) moved the old entries past its
end too, and with such an entry marked it spoilt the
catalogue: now only the files up to the catalogue's end are
moved. M broken off on a disk whose first deleted entry has
no sectors (a catalogue's picture) deleted a whole file: now
the file stays.
[-] With a Gluk clock made by the keyboard's controller (ZXMC-2
on the Profi and others) keys were lost and stuck, a cursor
key held most of all: QC wrote to the CMOS each frame (the
clock's mode) and at each step of the cursor, and such a
controller writes the cells to its EEPROM and goes deaf
meanwhile. Now the clock's mode isn't written if it is 24
hours and BCD already, and QC writes its cells only when
they change, a second after the cursor's last step.
[-] If another disk was put in at a write error, Retry or Ignore
wrote the rest of the file onto it: now QC says Bad disk.
and writes nothing.
[-] P, if another disk was put in in the middle of packing,
added the file to the new disk's catalogue and wrote its
data over the first one's free sectors: now P says Bad disk.
and adds no file.
[-] G with the catalogue's first picture marked (an entry with
no sectors at 0/0) wrote the file onto the catalogue's
track, and the next files were lost: now the file starts
where the first file with sectors does.
[-] R at the end of the full catalogue (F) wrote a name there
over free sectors: now R does nothing there.
[-] Erase of the last file after a deleted entry with no sectors
left its room taken: now it is freed.
[-] F turning the full catalogue off clears the marks: an old
entry past the catalogue's end marked with the full
catalogue stayed marked unseen, and Copy and Erase took it.
[-] Quick Setup's images (M): an SCL esxDOS can't mount isn't
mounted (writing to it spoilt the file); N on a full card
deletes the TRD it began.
[-] A file whose length in the catalogue doesn't match its
sectors was loaded (View, muZ, U, P) without its sectors'
last byte.
[-] The player: a PT2 portamento of step 0 to a higher note
slid by 256 a frame, now the note before goes on; in PT3
(3x00 up) as in Vortex Tracker II: the new note a frame on.
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
:: The previous version - 3.32 (23.10.2026)
в”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђв”Ђ
в–‘ в–‘в–“в–„в–„в–„в–„в–„
в–„ в–“ в–“в–Ђ в–Ђв–Ђв–Ђв–“в–„в–„в–„в–„в–„ в–Ђв–“в–€в–„ в–Ђв–Ђв–Ђв–€в–€в–€в–€в–“в–„в–„в–„в–„ в–“
в–€в–€в–“в–€в–€в–„в–„в–„ в–“в–‘ в–‘ в–Ђв–Ђв–Ђв–Ђв–’в–Ђв–€в–“в–„ в–Ђв–Ђв–Ђв–Ђв–€в–€в–“в–€в–€в–„в–„в–„ в–“в–‘
в–‘в–Ђв–Ђв–Ђв–“в–€в–€в–€в–“в–„в–€в–’ в–‘ в–’ в–Ђв–‘ в–‘в–Ђв–Ђв–Ђв–“в–€в–€в–€в–“в–„в–€в–’
в–‘ в–Ђв–Ђв–€ в–‘ в–‘ в–‘ в–Ђв–Ђв–€ в–‘
(c) 1998-2026 Andrey Bogdanovich (Spectre)
www.zxby.org spectre@zxby.org